Picture
As of December 2017 I am an author/co-author of more than 50 papers covering many aspects of high temperature corrosion, electroceramics, impedance spectroscopy, electrochemistry and fuel cells. As indexed by ISI Web of Knowledge, my H-index is currently 10.

(image based on Web of Knowledge, December 2017).

List of my publications:

From the Master Journal LIst: (with IF):
  1. "High Temperature Corrosion Evaluation and Lifetime Prediction of Porous Fe22Cr Stainless Steel in Air in Temperature Range 700-900° C"D Koszelow, M Makowska, F Marone, J Karczewski, P Jasinski, S Molin, Corrosion Science, 109589 2021.
  2. "Gigantic electro-chemo-mechanical properties of nanostructured praseodymium doped ceria" - VB Tinti, A Kabir, JK Han, S Molin, V Esposito
    Nanoscale 13 (16), 7583-7589 2021.
  3. "Mn-Co spinel coatings on Crofer 22 APU by electrophoretic deposition: up scaling, performance in SOFC stack at 850°C and compositional modifications" - A.G. Sabato, E. Zanchi, S. Molin, G. Cempura, H. Javed, K. Herbrig, C. Walter, A.R. Boccaccini, F. Smeacetto, accepted in Journal of the European Ceramic Society, March 2021.
  4. "Improvement of Oxygen Electrode Performance of Intermediate Temperature Solid Oxide Cells by Spray Pyrolysis Deposited Active Layers" - B. Kamecki, J. Karczewski, P. Jasiński, S. Molin, Advanced Materials Interfaces, February 2021.
  5. "Influence of Gd deposition on the oxidation behavior and electrical properties of a layered system consisting of Crofer 22 APU and MnCo2O4 spinel" - T. Brylewski, S. Molin, M. Marczyński, K. Domaradzki, O. Kryshtal, A. Gil, International Journal of Hydrogen Energy.
  6. "Recent advances on spinel-based protective coatings for solid oxide cell metallic interconnects produced by electrophoretic deposition" - E. Zanchi, A.G. Sabato, S. Molin, G. Cempura, A.R. Boccaccini, F. Smeacetto, Materials Letters, 
  7. "Preparation and characterisation of iron substituted Mn1. 7Cu1. 3-xFexO4 spinel oxides (x= 0, 0.1, 0.3, 0.5)" Journal of the European Ceramic Society
  8. "Processing of Ce0. 8Gd0. 2O2-δ barrier layers for solid oxide cells: The effect of preparation method and thickness on the interdiffusion and electrochemical performance" Journal of the European Ceramic Society
  9. "Electrical conductivity of nanostructured acceptor-doped ceria fabricated by spark plasma sintering (SPS)" Materials Letters 
  10. "Electro-chemo-mechanical properties in nanostructured Ca-doped ceria (CDC) by field assisted sintering" Scripta Materialia
  11. "Study of oxygen electrode reactions on symmetrical porous SrTi0. 30Fe0. 70O3-δ electrodes on Ce0. 8Gd0. 2O1. 9 electrolyte at 800° C–500° C" Electrochimica Acta
  12. "MnxCo3-xO4 spinel oxides as efficient oxygen evolution reaction catalysts in alkaline media" International Journal of Hydrogen Energy
  13. "Iron doped manganese cobaltite spinel coatings produced by electrophoretic co-deposition on interconnects for solid oxide cells: Microstructural and electrical characterization" Journal of Power Sources
  14. "Effect of sintering temperature on electrochemical performance of porous SrTi 1-x Fe x O 3-δ (x= 0.35, 0.5, 0.7) oxygen electrodes for solid oxide cells"  Journal of Solid State Electrochemistry
  15. "The Influence of the Electrodeposition Parameters on the Properties of Mn-Co-Based Nanofilms as Anode Materials for Alkaline Electrolysers" Materials
  16. B. Hołówko, J. Karczewski, S. Molin, P. Jasiński - "Preparation of Hydrogen Electrodes of Solid Oxide Cells by Infiltration: Effects of the Preparation Procedure on the Resulting Microstructure" Materials 13(1) 131 2020.
  17. H. Abdoli, S. Molin, H. Farnoush - "Effect of interconnect coating procedure on solid oxide fuel cell performance"  Materials Letters 259 2020.
  18. B. Talic, A.C. Wulff, S. Molin, K.B. Andersen, P. Zielke, H.L. Frandsen - "Investigation of electrophoretic deposition as a method for coating complex shaped steel parts in solid oxide cell stacks" accepted to Surface & Coatings Technology 2019.
  19. K. Cysewska, G. Cempura, J. Karczewski, M. Łapiński, P. Jasiński, S. Molin - "The influence of thermal treatment on electrocatalytic properties of Mn-Co nanofilms on nickel foam toward oxygen evolution reaction activity" Materials Letters 258 126759 (2020).
  20. S. Molin, A.H. Persson, T.L. Skafte, A.L. Smitshuysen, S.H. Jensen, K.B. Andersen, H. Xu, M. Chen, P.V. Hendriksen - "Effective yttrium based coating for steel interconnects of solid oxide cells: corrosion evaluation in steam-hydrogen atmosphere" Journal of Power Sources, accepted, 2019.
  21. B. Kamecki, J. Karczewski, H. Abdoli, M. Chen, G. Jasiński, P. Jasiński, S. Molin - "Deposition, electrical and structural properties of La0.4Sr0.4CoO3 thin films for application in high temperature electrochemical cells" Journal of Electronic Materials, accepted, 2019.
  22. A.G. Sabato, S. Molin, H. Javed, E. Zanchi, A.R. Boccaccini, F. Smeacetto - "In-situ Cu-doped MnCo-spinel coatings for solid oxide cell interconnects processed by electrophoretic deposition" Ceramics International, accepted, 2019.
  23. E. Zanchi, B. Talic, A.G. Sabato, S. Molin, A.R. Boccaccini, F. Smeacetto - "Electrophoretic co-deposition of Fe2O3 and Mn1.5Co1.5O4: Processing and oxidation performance of Fe-doped Mn-Co coatings for solid oxide cell interconnects" Journal of the European Ceramic Society, accepted, 2019.
  24. C. Jia, Y. Wang, S. Molin, Y. Zhang, M. Chen, M. Han - "High temperature oxidation behavior of SUS430 SOFC interconnects with Mn-Co spinel coating in air" Journal of Alloys and Compounds, accepted manuscript, 2019.
  25. M. Bednarz, S. Molin, M. Bobruk, M. Stygar, E. Długoń, M. Sitarz, T. Brylewski - "High-temperature oxidation of the Crofer 22 H ferritic steel with Mn1.45Co1.45Fe0.1O4 and Mn1.5Co1.5O4 spinel coatings under thermal cycling conditions and its properties" Materials Chemistry and Physics 225 2019 pp.227-238.
  26. J. Karczewski, T. Brylewski, T. Miruszewski, K.B. Andersen, P. Jasiński, S. Molin - "High-temperature kinetics study of 430L steel powder oxidized in air at 600–850 °C" - Corrosion Science 149 2019 pp.100-107.
  27. A. Mroziński, S. Molin, J. Karczewski, T. Miruszewski, P. Jasiński - "Electrochemical properties of porous Sr0.86Ti0.65Fe0.35O3 oxygen electrodes in solid oxide cells: Impedance study of symmetrical electrodes" - International Journal of Hydrogen Energy 44 (13) 2019, pp.1827-1838.
  28. B. Kamecki, J. Karczewski, T. Miruszewski, G. Jasiński, D. Szymczewska, P. Jasiński, S. Molin – „Low temperature deposition of dense MnCo2O4 protective coatings for steel interconnects of Solid Oxide Cells” Journal of the European Ceramic Society 38 (13) 2018 pp.4576-4579.
  29. B. Talic, S. Molin, Peter Vang Hendriksen, Hilde Lea Lein - "Effect of pre-oxidation on the oxidation resistance of Crofer 22 APU" Corrosion Science 138 2018 pp.189-199.
  30. S. Molin, A.G. Sabato, H. Javed, G. Cempura, A.R. Boccaccini, F. Smeacetto - "Co-deposition of CuO and Mn1.5Co1.5O4 powders on Crofer22APU by electrophoretic method: structural, compositional modifications and corrosion properties" - Materials Letters 218 2018 pp.329-333.
  31. M. Bobruk, S. Molin, M. Chen, T. Brylewski, P.V. Hendriksen - "Sintering of MnCo2O4 coatings prepared by electrophoretic deposition" - Materials Letters 213 2018 pp.394-398.
  32. J. Karczewski, K. Dunst, P. Jasinski, S. Molin - "Influence of yttria surface modification on high temperature corrosion of porous Ni22Cr alloy" - International Journal of Applied Ceramic Technology 15 (2) 2018 pp.361-369.
  33. B. Talic, S. Molin, K. Wiik, P.V. Hendriksen, H.L. Lein - "Comparison of iron and copper doped manganese cobalt spinel oxides as protective coatings for solid oxide fuel cell interconnects" - Journal of Power Sources (2017) 372 pp.145-156.
  34. S. Molin - "Evaluation of electrodeposited Mn-Co protective coatings on Crofer 22 APU steel" - International Journal of Applied Ceramic Technology 15 (2) 2018 pp.349-360.
  35. S. Molin, A. G. Sabato, M. Bindi, P. Leone, G. Cempura, M. Salvo, S. Cabanas Polo, A. R. Boccaccini, F. Smeacetto – “Microstructural and electrical characterization of Mn-Co spinel protective coatings for solid oxide cell interconnects” – Journal of the European Ceramic Society 37 (15) 2018 pp.4781-4791.
  36. M. Chen, H. Alimadadi, S. Molin, L. Zhang, N. Ta, P. V. Hendriksen, R. Kiebach, Y. Du – “Modeling of Ni diffusion induced austenite formation in ferritic stainless steel interconnects” – Journal of the Electrochemical Society, 2017 164(9): F1005-F1010.
  37. D. Szymczewska, S. Molin, P.V. Hendriksen, P. Jasinski - Microstructure and electrical properties of Fe,Cu substituted (Co,Mn)3O4 thin films - Crystals 7, 185 2017. (open access, LINK)
  38. D.N. Boccaccini, O. Sevecek, H.L. Frandsen, I. Dlouhy, S. Molin, B. Charlas, J. Hjelm, M. Cannio, P.V. Hendriksen - Determination of the bonding strength in solid oxide fuel cells’ interfaces by Schwickerath crack initiation test - Journal of the European Ceramic Society 37 (2017) pp.3565–3578.
  39. J. Molenda, J. Kupecki, R. Baron, M. Blesznowski, G. Brus, T. Brylewski, M. Bucko, J. Chmielowiec, K. Cwieka, M. Gazda, A. Gil, P. Jasinski, Z. Jaworski, J. Karczewski, M. Kawalec, R. Kluczowski, M. Krauz, F. Krok, B. Lukasik, M. Malys, A. Mazur, A. Mielewczyk-Gryn, J. Milewski, S. Molin, G. Mordarski, M. Mosialek, K. Motylinski, E.N. Naumovich, P. Nowak, G. Pasciak, P. Pianko-Oprych, D. Pomykalska, M. Rekas, A. Sciazko, K. Swierczek, J. Szmyd, S. Wachowski, T. Wejrzanowski, W. Wrobel, K. Zagorski, W. Zajac, A. Zurawska - Status report on high temperature fuel cells in Poland – Recent advances and achievements, International Journal of Hydrogen Energy 42, 4366–4403 (2017).
  40. D. Szymczewska, A. Chrzan, J. Karczewski, S. Molin, P. Jasinski - "Spray pyrolysis of doped-ceria barrier layers for solid oxide fuel cells" - Surface and Coatings Technology 313 (2017) pp.168-176. (IF=2.139) 
  41. S. Molin, P. Jasinski - "Improved performance of LaNi0.6Fe0.4O3 solid oxide fuel cell cathode by application of a thin interface cathode functional layer" - Materials Letters, 189, 252-255 (2017) (IF=2.437).
  42. S. Molin, P. Jasinski, L. Mikkelsen, W. Zhang, M. Chen, P.V. Hendriksen, Low temperature processed MnCo2O4 and MnCo1.8Fe0.2O4as effective protective coatings for solid oxide fuel cell interconnects at 750°C, Journal of Power Sources 336, 408–418 (2016). (IF=6.333).
  43. S. Molin, A. Chrzan, J. Karczewski, D. Szymczewska, P. Jasinski - "The role of thin functional layers in Solid Oxide Fuel Cells", Electrochimica Acta, 204, 2016, pp.136-145. (IF=4.5).
  44. S. Molin, K.J. Dunst, J. Karczewski, P. Jasinski - "High Temperature Corrosion Evaluation of Porous Hastelloy X Alloy in Air and Humidified Hydrogen Atmospheres" - Journal of the Electrochemical Society, 163 (6), 2016 p.C296-C302.
  45. R. Kiebach, K. Engelbrecht, K. Kwok, S. Molin, M. Søgaard, P. Niehoff, F. Schulze-Küppers, R. Kriegel, J .Kluge, P.-V. Hendriksen - "Joining of ceramic Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3 membranes for oxygen production to high temperature alloys" - Journal of Membrane Science, 2016, 506, p.11-21.
  46. D.N. Boccaccini, O. Sevecek, H.L. Frandsen, I. Dlouhy, S. Molin, M. Cannio, J. Hjelm, P.-V. Hendriksen - "Investigation of the bonding strength and bonding mechanisms of SOFCs interconnector-electrode interfaces" Materials Letters 162 2015, p.250-253.
  47. F. Smeacetto, A.C. De Miranda, S. Cabanas Polo, S. Molin, D. Boccaccini, M. Salvo, A.R. Boccaccini - "Electrophoretic deposition of Mn1.5Co1.5O4 on metallic interconnect and interaction with glass-ceramic sealant for Solid Oxide Fuel Cells application" - Journal of Power Sources 280, 2015, p.379-386.
  48. J. Karczewski, K.J. Dunst, P. Jasinski, S. Molin - "High temperature corrosion and corrosion protection of porous Ni22Cr alloys" - Surface and Coatings Technology 261, 2015, p.385-390.
  49. P. Gdaniec, J. Karczewski, B. Bochentyn, M. Gazda, S. Molin, P. Jasinski, A. Krupa, B. Kusz - "Application of wet powder spraying
    for anode supported solid oxide fuel cell with a perovskite SrTi0.98Nb0.02O3–d anode" - Physica Status Solidi A 12, 2013, p.2736-2741.
  50. S. Molin, M. Chen, P.V. Hendriksen - "Oxidation study of coated Crofer 22 APU steel in dry oxygen" - Journal of Power Sources 251, 2013, p.488-495.
  51. K.M. Dunst; J. Karczewski; T. Miruszewski; B. Kusz; M. Gazda; S. Molin; P.Z. Jasinski – “Investigation of functional layers of solid oxide fuel cell anodes for synthetic biogas reforming” – accepted to Solid State Ionics 251, 2013, p.70-77.
  52. J. Karczewski, B. Bochentyn, S. Molin, P. Jasinski, M. Gazda, B. Kusz "Solid Oxide Fuel Cells with Ni-infiltrated perovskite anode" Solid State Ionics 221. 2012. p.11-14.
  53. K. Gdula-Kasica, A. Mielewczyk-Gryn, S. Molin, P. Jasinski, A. Krupa, B. Kusz, M. Gazda "Optimization of microstructure and properties of acceptor-doped barium cerate" Solid State Ionics 225, 2012, p.245-249.
  54. B. Bochentyn, J. Karczewski, S. Molin, T. Klimczuk, M. Gazda, P. Jasinski, D.J. Safarik, B. Kusz "The comparison of SrTi0.98Nb0.02O3-delta-CeO2 and SrTi0.98Nb0.02O3-delta-YSZ composites for use in SOFC anodes" - Journal of Electroceramics 28 (2-3), 2012 p.132-138.
  55. S. Molin, W. Lewandowska-Iwaniak, B. Kusz, M. Gazda, P. Jasinski "Structural and electrical properties of Sr(Ti, Fe)O3-delta materials for SOFC cathodes" - Journal of Electroceramics 28 (1) 2012 p.80-87.
  56. S. Kosedowski, S. Molin, P. Jasiński - "Fabrication and characterization of anode supported solid oxide fuel cells" - Functional Materials Letters 4 (2), 2011 p.161-164. IF(2011)=2.671
  57. S. Molin, M. Tolczyk, M. Gazda, P. Jasinski - "Stainless Steel/Yttria Stabilized Zirconia Composite Supported Solid Oxide Fuel Cell"Journal of Fuel Cell Science and Technology 8, 2011, p. 051019, IF(2011)=0.884
  58. S. Molin, M. Gazda, P. Jasinski - "Coatings for improvement of high temperature corrosion resistance of porous alloys" Journal of the European Ceramic Society 14, 2011, p.2707-2710.
  59. K. Gdula-Kasica, A. Mielewczyk-Gryn, T. Lendze, S. Molin, B. Kusz, M. Gazda - "Synthesis of acceptor-doped Ba-Ce-Zr-O perovskites" - Crystal research and technology 45, 2010, pp. 1251-1257. IF(2009): 0.896
  60. A. Mielewczyk-Gryn, K. Gdula-Kasica, S. Molin, P. Jasinski, B. Kusz, M. Gazda - "Structure and electrical properties of ceramic proton conductors obtained with molten-salt and solid-state synthesis methods" - Journal of Non-crystalline solids 356, 2010, p. 1976-1779. IF(2010): 1.252
  61. S. Molin, M. Gazda, P. Jasinski - "High temperature oxidation of porous alloys for solid oxide fuel cell applications" - Solid State Ionics 181, 2010, p. 1214-1220. IF(2010):2.162
  62. S. Molin, M. Gazda, P. Jasinski - "Interaction of yttria stabilized zirconia electrolyte with Fe2O3 and Cr2O3" - Journal of Power Sources 194, 2009, p. 20-24. IF (2009): 3.477
  63. P. Jasinski, S. Molin, M. Gazda, V. Petrovsky, H. U. Anderson - "Applications of spin coating of polymer precursor and slurry suspensions for Solid Oxide Fuel Cell fabrication" - Journal of Power Sources 194, 2009, p. 10-15. IF (2009): 3.477
  64. S. Molin, M. Gazda, P. Jasinski - "Conductivity improvement of Ce0.8Gd0.2O1.9 solid electrolyte" - Journal of Rare Earths 27, 2009, p. 655-660. IF (2009): 0.530
  65. S. Molin, B. Kusz, M. Gazda, P. Jasiński - "Protective coatings for stainless steel for SOFC applications" - Journal of Solid State Electrochemistry13, 2009, p. 1695-1700. IF (2008): 1.597
  66. S. Molin, M. Gazda, B. Kusz, P. Jasiński - "Evaluation of 316L porous stainless steel for SOFC support" - Journal of the European Ceramic Society 29, 2009, p. 757-762 IF: 1.562
  67. S. Molin, B. Kusz, M. Gazda, P. Jasiński - "Evaluation of porous 430L stainless steel for SOFC operation at intermediate temperatures" - Journal of Power Sources 181, 2008, p. 31-37. IF: 2.809
  68. J. Karczewski, B. Riegel, S. Molin , A. Winiarski, M. Gazda, P. Jasiński, L. Murawski, B. Kusz - "Electrical properties of Y0.08Sr0.92Ti0.92Nb0.08O3 after reduction in different reducing conditions" - Journal of Alloys and Compounds 473, 2009, p. 496-499. IF: 1.455
  69. M. Gazda, P. Płonczak, S. Molin , B. Kusz, P. Jasiński - "Chemical interaction between perovskite La0.6Sr0.4FeO3 and super-ionic Zr0.84Y0.16Ox ", Acta Physica Polonica A 114, 2008, p. 135-141. IF: 0.364

Book chapters:
  1. Advanced Ceramics for Energy Conversion and Storage, 1st Edition, 2019, Elsevier series in advanced ceramic materials, Editor: Olivier Guillon, co-authored (with Federico Smeacetto and Gianfranco Sabato) a chapter on "Ceramic coatings for interconnects" in "Solid oxide fuel and electrolysis cells part".
​
Other peer reviewed publications:

  1. A. Mroziński, S. Molin, J. Karczewski, B. Kamecki, P. Jasinski - "The Influence of Iron Doping on Performance of SrTi1-XFexO3-δ Perovskite Oxygen Electrode for SOFC" ECS Transactions 91 1 2019.
  2. B. Kamecki, J. Karczewski, P. Jasinski, S. Molin - "Evaluation of Praseodymium and Gadolinium Doped Ceria as a Possible Barrier Layer Material for Solid Oxide Cells" ECS Transactions 91 1 2019.
  3. ​S. Molin, M. Bobruk, J. Wyrwa, J. Pleśniak, T. Brylewski - "Chemical stability of a 3-YSZ-Al2O3 electrolyte in relation to electrode materials for use in the intermediate-temperature solid oxide fuel cells" Ceramic Materials 70 (1) 2018.
  4. D. Szymczewska, S. Molin, M. Chen, P. Jasinski, P.V. Hendriksen - "Corrosion study of ceria protective layer deposited by spray pyrolysis on steel interconnects" - Advances in Solid Oxide Fuel Cells and Electronic Ceramics II: Ceramic Engineering and Science Proceedings Volume 37, 2016, pp. 79-85.
  5. D. Szymczewska, S. Molin, V. Venkatachalam, M. Chen, P. Jasinski, P.V. Hendriksen - "Assessment of (Mn,Co)3O4 powders for possible coating material for SOFC/SOEC interconnects" - 2016 IOP Conf. Ser.: Mater. Sci. Eng. 104 012017.
  6. M. Chen,  S. Molin, L. Zhang, N. Ta, P.V. Hendriksen, W.-R-Kiebach, Y. Du - "Modeling of Ni Diffusion Induced Austenite Formation in Ferritic Stainless Steel Interconnects", ECS Transactions 68 (1) 2015 p.1691-1700.
  7. D. Szymczewska, S. Molin, M. Chen, P.V. Hendriksen, P. Jasinski - "Ceria based protective coatings for steel interconnects prepared by spray pyrolysis" proceedings of 11th International Symposium on Systems with Fast Ionic Transport, Gdansk, Poland. Procedia Engineering 98 (2014) 93-100.
  8. S.Molin, M. Chen, N. Bonanos - "Optimization of ferritic steel porous supports for protonic fuel cells working at 600C" proceedings of the 19th International Corrosion Congress, Jeju, South Korea
  9. V. Venkatachalam, S. Molin, W. R. Kiebach, M. Chen, P.V. Hendriksen - "Influence of Mn-Co spinel coating on oxidation behavior of ferritic ss alloys for sofc interconnect applications" proceedings of MS&T Conference, Pittsburgh 2014, USA.
  10. V. Venkatachalam, S. Molin, M. Chen, I. Smirnov, P.-O. Larsson, P.V. Hendriksen, N. Bonanos - "Optimization of ferritic steel porous supports for protonic fuel cells working at 600C" proceedings of MS&T Conference, Pittsburgh 2014, USA.
  11. S. Molin, M. Chen, J.R. Bowen, P.V. Hendriksen - "Study of Diffusion of Nickel into Ferritic Steel Interconnects of Solid Oxide Fuel/Electrolysis Stacks" ECS Transactions, Proceedings of SOFC-XIII conference, Okinawa, 2013.
  12. S. Molin, K. Kobierowska, M. Karpinska, J. Karczewski, P. Jasinski - "Fabrication, Microstructure and High Temperature Corrosion Resistance of Porous Alloys for Solid Oxide Fuel Cells" Proceeding of FDFC Conference in Karlsruhe, Niemcy, Kwiecien 2013
  13. S. Molin, M. Chen, J.J. Bentzen, P.V. Hendriksen – “High Temperature Oxidation of Ferritic Steels for Solid Oxide Electrolysis Stacks” ECS Transactions, Proceedings of PRiME Conference, Honolulu, 2012.
  14. M. Gazda, P. Jasinski, B. Kusz, B. Bochentyn, K. Gdula-Kasica, T. Lendze, W. Lewandowska-Iwaniak, A. Mielewczyk-Gryn, S. Molin "Perovskites in Solid Oxide Fuel Cells" Environmental degradation of engineering & materials engineering and technologies, Book series: Solid State Phenomena 185, p.65-70.
  15. S. Molin, K. Dunst, P. Jasinski "Solid oxide fuel cells for distributed energy generation" - Eco-energetics - Biogas and syngas, printed both in polish and english version, proceedings of Baltic Gas Forum 2011
  16. P. Jasinski, W. Lewandowska-Iwaniak, S. Molin "Metal Supported Solid Oxide Fuel Cells - Selected Aspects" IOP Conference Series: Materials Science and Engineering 18 (2011) 132004
  17. S. Molin, P. Jasiński "Tlenkowe ogniwa paliwowe zbudowane na nośnym elemencie z metalowego porowatego interkonektora" Biuletyn Polskiego Stowarzyszenie Wodoru i Ogniw Paliwowych 5 2010
  18. S. Molin, G. Jasinski, P. Jasinski "Sensing properties of a mixed-potential NOx sensor based on YSZ ceramic" Proceedings of IMAPS CPMT 2009 Conference Proceedings, Gliwice-Pszczyna 21-24 wrzesień 2009
  19. M. Tolczyk, S. Molin, M. Gazda, P. Jasinski: "Structural and electrical properties of STF materials for SOFC applications", Proceedings of 11th International Conference and Exhibition of the European Ceramic Society, Krakow 21 - 25 June 2009
  20. A. Mielewczyk, S. Molin, K. Gdula ,G. Jasinski, B. Kusz, P.Jasinski, M. Gazda, "Structure and Electric Properties of Double Magnesium Zirconium Orthophosphate" Proceedings of 11th International Conference and Exhibition of the European Ceramic Society, Krakow 21 - 25 June 2009
  21. S. Molin, M. Gazda, P. Jasinski, "High temperature corrosion of stainless steels for Solid Oxide Fuel Cells" XII Międzynarodowe Seminarium Naukowe Studentów i Młodych Inżynierów Mechaników, Gdańsk 21-23 maja 2009
  22. S. Molin, M. Gazda, G. Jasiński, P. Jasinski, A. Nowakowski, "Development of resistive type oxygen gas sensors", Proceedings of IMAPS CPMT 2008 Conference Proceedings, Pułtusk 21-24 wrzesień 2008
  23. S. Molin , M. Gazda, B. Kusz, P. Jasinski, "Net Shape Processed Electrolyte on 316L Porous Metal Supported SOFC", Proceedings of 10th International Conference and Exhibition of the European Ceramic Society, 17 - 21 June, Berlin 2007

National Polish peer-reviewed publications (journals on ministerial list):

  1. S. Molin, J. Karczewski, D. Szymczewska, A. Chrzan, P. Jasinski - "Warstwy funkcjonalne tlenkowych ogniw paliwowych" - Biuletyn Polskiego Stowarzyszenia Wodoru i Ogniw Paliwowych, 10, 2016, pp. 33-36.
  2. K. Dunst, S. Molin, P. Jasinski "Impedance spectroscopy as a diagnostic tool of degradation of Solid Oxide Fuel Cells"- Elektronika: konstrukcje, technologie, zastosowania, 2012 nr 1, s. 59-61.
  3. K. Kobierowska, M. Karpinska, S. Molin, P. Jasinski "Oxide layers fabricated by spray pyrolysis on metalic surfaces" - Elektronika: konstrukcje, technologie, zastosowania, 2012 nr 1, s. 74-77.
  4. M. Tolczyk, S. Molin, M. Gazda, P. Jasinski "Właściwości strukturalne i elektryczne materiałów STF do zastosowań w SOFC" Materiały Ceramiczne / Ceramic Materials 63 (1 ) 2011 p.151-156.
  5. S. Molin, P. Jasiński - "Cienkowarstwowe nanokrystaliczne katody dla tlenkowych ogniw paliwowych" - Zeszyty Naukowe Wydziału Elektroniki, Telekomunikacji i Informatyki Politechniki Gdańskiej, Tom 1, 2011, s. 109-114
  6. K. Kobierowska, M. Karpińska, P. Jasiński, S. Molin, - "Metoda pirolizy aerozolowej - przygotowanie warstw antykorozyjnych na stali nierdzewnej " - Zeszyty Naukowe Wydziału Elektroniki, Telekomunikacji i Informatyki Politechniki Gdańskiej, Tom 1, 2011, s. 249-254
  7. M. Karpińska, S. Molin, K. Kobierowska, P. Jasiński - "Charakteryzacja warstw tlenkowych na stali 316L dla potrzeb implantów biomedycznych" - Zeszyty Naukowe Wydziału Elektroniki, Telekomunikacji i Informatyki Politechniki Gdańskiej, Tom 1, 2011, s. 103-108
  8. S. Molin, G. Jasiński, M. Gazda, P. Jasiński - "Wytwarzanie oraz charakteryzacja rezystancyjnych czujników tlenu z wykorzystaniem SrTi0.65Fe0.35O3" - Elektronika: konstrukcje, technologie, zastosowania, 2010 nr 6, s. xxx.
  9. S. Molin, P. Jasiński - "Elektryczne pomiary tlenkowych ogniw paliwowych" - Pomiary Automatyka Kontrola (PAK), 2008 nr 03, s. 110-113.
  10. S. Molin, M. Gazda, P. Jasiński, A. Nowakowski - "Electrical properties of porous nanocrystalline undoped ceria oxygen sensor" - Elektronika: konstrukcje, technologie, zastosowania, 2008 nr 6, s. 253-255.